Free Shipping Over $250
All Categories/Product Catalog/Welding Products/Filler Metal/Solder/Silver - Soldering & Brazing/Harris® 1/16" Safety-Silv® Round High Silver Brazing Alloy Filler Metal 50 toz Box

Harris® 1/16" Safety-Silv® Round High Silver Brazing Alloy Filler Metal 50 toz Box

Part Number: 40350HSKU: HAR40350H
$2,002.88

Qty: Order In Bulk
Adding this item to your cart will qualify your order for free shipping.

Item Details

Harris® Safety-Silv® 40 high silver brazing alloy filler metal 1/16" round 50 troy oz. coil packed in a box is a ductile free-flowing alloy with good penetration into tight connections. Formulated for brazing copper, brass and steel. The lower melting range allows it to be used where part clearance cannot be tightly controlled. Safety-Silv® 40 provides an opportunity for cost savings when compared with traditional 45% silver alloys. It is a silver to light yellow color, like polished brass. Conforms to the EU Reach and RoHS directive.

Features

  • Cadmium-free, silver brazing alloy
  • Good ductility
  • Often used for corrosive applications or high temperature service, so suitability for the brazing alloy should be evaluated for the intended condition
  • Good replacement for hazardous cadmium-bearing filler metals
  • Moderate temperature alloy with a medium plastic range
  • Suitable for brazing assemblies with wider gaps
  • Fluidity rating of 8.0
  • Corrosion resistance is generally similar to copper base metal, but due to its zinc content it should not be used if the braze is exposed to concentrated corrosive liquid for long periods of time
  • Conforms to the EU Reach and RoHS directive

Applications

  • Brazing copper, brass and steel alloys.
  • Cost effective alternative to 45% silver alloys.
  • Suitable for wider clearances.
  • Provides good ductility.

Specifications

  • "
  • Alloy Material» 40% Silver
  • Diameter» 1/16""
  • Solder Type» Round High Silver Brazing Alloy Filler Metal
  • Trade Name» Safety-Silv®
  • Weight» 50 toz
  • Package» Box"

Caution

  • Before use, read and understand the manufacturer's instructions, Safety Data Sheets (SDS) and your employer's safety practices
  • Keep your head out of fumes
  • Use enough ventilation, exhaust at the flame, or heat source, to keep fumes and gases from your breathing zone and the general area
  • Wear correct eye, ear, and body protection

WARNING

  • WARNING: This product can expose you to chemicals including Nitrogen Dioxide, which is known to the State of California to cause cancer, and Carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Things are probably looking a bit weird.

JavaScript is required for full site functionality.