1/8" X 14" E11018MR AtomArc® Low Alloy Stick Electrode 10 lb Hermetically Sealed Can

Part Number: 255111825SKU: ESA255111825

$89.25

Unit Of Measure:

Add $250.00 worth of items to your cart to qualify for free shipping.

Item Details

ESAB® AtomArc® E11018-M H4R T Low Alloy Steel Electrode with 1/8" Dia is designed for welding T-1 and a similar high strength steels. It is suitable for many other applications, especially where high-strength welds with excellent low temperature impact properties are required. The flux coatings are designed to effectively resist moisture pick-up in opened containers. The mechanical properties of the welded joints equal or exceed the properties of the base steel in either the welded or stress relieved condition, thus giving 100% design joint efficiency. The improved coating offers an extra degree of reliability, especially for electrode exposed to high humidity environments. Moisture testing results are conducted in accordance with AWS A5.1 and A5.5 specifications. AWS structural code provides a maximum of 0.4% moisture by weight for all E70XX electrodes. Although moisture-resistant coatings prolong the exposure time, storage and reconditioning should not be excluded. Low hydrogen electrodes are available in a variety of strength levels and chemical analysis for welding almost every type of mild and low alloy steel. The introduction of these iron powder electrodes, fabricators can increase their productivity while reducing their overall welding cost. Electrode comes in a 10 lb hermetically sealed container.

Features

Moisture resistant coatings are incorporated in all AtomArc® electrodes
The flux coatings are manufactured to effectively resist moisture pick up in opened containers
The improved coating provides an extra degree of reliability, especially for electrodes exposed to high humidity environments
Moisture testing results are conducted in accordance with AWS A5.1 and A5.5 specifications
AWS structural code allows a maximum of 0.4% moisture by weight for all E70XX electrodes
Military requirements vary depending on the specific electrode classification
Although moisture resistant coatings prolong the exposure time, storage and reconditioning should not be eliminated
Mechanical properties of the welded joints equal or exceed the properties of the base steel in either the as welded or stress relieved condition

Applications

General fabrication
Railroad car
Mobile machinery
Bridge construction
Civil construction
Shipbuilding

Specifications

"
Trade Name» AtomArc®
AWS Classification» E11018MR
Diameter» 1/8""
Weight» 10 lb
Electrode Length» 14""
Package» Hermetically Sealed Can"

Caution

Preheat should be used on hardenable steels to prevent the formation of a hard heat-affected zone
Preheat may also be required in welding heavy sections

WARNING

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov