Free Shipping Over $250
All Categories/Product Catalog/Welding Products/Welding Support Equipment/Mig Gun Consumables/Nozzles/Tweco® 1/8" - 5/32" X 3.29" .625" Bore HD24 Series Nozzle

Tweco® 1/8" - 5/32" X 3.29" .625" Bore HD24 Series Nozzle

Part Number: 12401241SKU: TWE1240-1241
$35.30

Qty: Order In Bulk
Add $250.00 worth of items to your cart to qualify for free shipping.

Item Details

Tweco® Slip-On Nozzle with a 0.625" bore size fits standard gas diffuser and is designed to use for 450 A Tweco® SprayMaster® MIG guns. 3.29" Nozzle has a 1.117" OD and is used in heavy-duty welding applications for up to 450 A. It features part number rolled stamped on the outer surface for easy identification. Nozzle with a recess contact tip relationship 0.125 - 0.156" that is used where longer electrical stick-out is needed or when the nozzle touches the work place is made of 122 DHP copper alloy. It has a 3-piece design that includes a nozzle housing that is cut and formed from copper alloy tubing, a nozzle insert machined from a solid brass and nozzle insulator constructed of silicone material. It has nozzle insert that allows it slide over a metal spring of the gas diffuser. Nozzle offers electrical insulation required from the gas diffuser using the nozzle insulator and is sold as 2 per pack.

Features

  • Easy identification - part no rolled stamped on the outside surface
  • 3-piece design - does not require an additional insulator
  • Nozzle housing - cut and formed from 122 dhp copper alloy tubing
  • Nozzle insulator - made from g7 silicone material, providing the electrical insulation needed from the gas diffuser
  • Nozzle Insert - machined from a solid brass allow and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser
  • Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
  • Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, This brings the tip closer to the work piece
  • Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint. However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace

Applications

  • Used in heavy duty welding application up to 450 Amp

WARNING

  • WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Things are probably looking a bit weird.

JavaScript is required for full site functionality.