Veteran Owned
RADNOR™ .023 - .045" X 1.99" 11 Style Gas Diffuser
Part Number: 64002720SKU: RAD64002721
$5.96
Item Details
RADNOR™ Standard Duty Brass Gas Diffuser is suitable to function properly Tweco® No. 1 as well as RADNOR™ MIG guns. Diffuser assures a consistent dimensional stability with its 360-brass alloy bar stock construction and is contoured to be used with thread on nozzle assemblies. Diffuser finds application in light to medium duty welding and is sold as 5 per pack.Features
- Easy identification - part no rolled stamped on the outside surface
- A machined thread is on the outside surface to allow the nozzle assemblies to thread over holding the nozzle in place during the welding process
- Designed to be used with thread on nozzle assemblies
- Machined from 360 brass alloy bar stock to ensure consistent dimensional stability
- Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
- Flush tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece
- Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
- However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Applications
- Used in light to medium duty welding application up to 180 Amp
- Use with thread on nozzle assemblies
WARNING
- WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.