Tweco® 5/8" Nozzle

Item Details

Features

• Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot and stitch)
• Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths
• This brings the tip closer to the work piece
• Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
• However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
• Straight ID bore at the front end of the nozzle - allows proper cleaning of the side walls to ensure good gas flow through the nozzle
• Ideal nozzle to use with a nozzle cleaning station generally incorporated in robotic weld cells
• 3-piece nozzle design, includes: Nozzle Housing - Machined from tellurium copper alloy bar
• Nozzle Insert - machined from a solid brass allow and machining the internal threads to match the gas diffuser
• Nozzle insulator - made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
• Easy identification - Part No. rolled stamped on the outside surface
• Designed to work with robotic/fixed automation MIG guns
• Bottle shaped geometry
• 3-piece design - does not require an additional insulator

Applications

• Used in medium to heavy duty welding application up to 600 Amp

WARNING

• WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov